 |
Melt Flow Indexer
Model: SZ-6605 This tester covers measurement of the rate of extrusion of molten resins through a die of specified length and diameter under prescribed conditions of temperature, load and piston position in the barrel for measuring the flow rates of polymer in producing process. This tester is complied with ASTM, ISO, JIS, CNS method A. The specimen can be cut off automatically either by a pre-setting specified time interval or by manually pressing the control key. It is applicable to test the material with a flow rates that fall between 0.15 and 50g/10min.
|
■ Test Standard
■ Specifications
|
Model |
SZ |
SZ-6605B |
|
Test Method |
MFR |
MFR, MVR |
|
Test Temp. |
Range: Room Temp. ～ | |
|
Control |
PID control, Contain overheat protected |
PLC control, Liquid-crystal display |
|
Time Setting |
Range: 0.1～999.9min Arbitrary setting, Accuracy: 0.1S | |
|
Displacement |
Range: 0～ | |
|
Cylinder |
Inner Diameter: 9.550± | |
|
Piston |
Head Diameter: 9.4745± | |
|
Die |
Material: Tungsten Carbide, Outer Diameter: 9.500± | |
|
Test Weight |
| |
|
Cutoff Device |
Auto / manual cutoff selection |
Auto / time control / manual cutoff selection |
|
Print Function |
Nothing |
With micro printer, print test results |
|
Dimension |
W400×D510×H |
W400×D500×H |
|
Weight |
|
|
|
Power |
1∮ AC220V | |
| Link: |
Copyright: Shanghai Sunzern Instrument Co.,Ltd. 沪ICP备18036229号-1
Tel: 021-51097800 E-mail: sunzern@sunzern.com
|
